|
T4 Graphite Upper Deck 2.0mm
#301197
CNC-machined upper deck of premium-grade 2.0mm thick graphite material, specially designed to fit the new narrow bulkheads and new aluminum top deck mount #306516.
|
|
|
T4'18 Graphite Upper Deck 2.0mm
#301199
Redesigned top deck to work with the redesigned layshaft bulkheads and motor mount which moves the motor 1mm closer to the center of the car.
|
|
|
T4 Foam Bumper - Hard
#301226
High-quality hard front foam bumper, hand-cut from specially-developed extra hard foam material. Very light, yet very strong. Protects front of car in serious collisions.
|
|
|
T4 Foam Bumper Wide - Hard
#301228
High-quality hard front foam bumper, hand-cut from specially-developed extra hard foam material. Protects front of car in serious collisions. Same dimensions as #301227 foam bumper.
|
|
|
Front Body Mount Set +1mm Height
#301323
XRAY presents +1mm height-adjustable body posts for the T2 and NT1. For serious racers who focus on the small details, body height plays a very important role in the performance of the car and as such, ultra-fine body height tuning was developed by XRAY R&D engineers to address this increasingly important tuning set-up feature.
|
|
|
Front Body Mount Set +2mm Height
#301324
XRAY presents +2mm height-adjustable body posts for the T2 and NT1. For serious racers who focus on the small details, body height plays a very important role in the performance of the car and as such, ultra-fine body height tuning was developed by XRAY R&D engineers to address this increasingly important tuning set-up feature.
|
|
|
Rear Body Mount Set +1mm Height
#301333
XRAY presents +1mm height-adjustable body posts for the T2 and NT1. For serious racers who focus on the small details, body height plays a very important role in the performance of the car and as such, ultra-fine body height tuning was developed by XRAY R&D engineers to address this increasingly important tuning set-up feature.
|
|
|
Rear Body Mount Set +2mm Height
#301334
XRAY presents +2mm height-adjustable body posts for the T2 and NT1. For serious racers who focus on the small details, body height plays a very important role in the performance of the car and as such, ultra-fine body height tuning was developed by XRAY R&D engineers to address this increasingly important tuning set-up feature.
|
|
|
Alu Adjustable Body Post Stop (2)
#301351-O
Very handy, easily externally adjustable body posts from Swiss 7075 T6 aluminum. Allows for adjustment of body height by 3mm without needing to change the position on the body post.
|
|
|
Front Suspension Arm - Hard
#302161
Hard molded composite front lower suspension arm. Recommended for use in standard conditions or with rubber tires. Marked with âśHâť for easy identification. May be used on either left or right side.
|
|
|
Front Suspension Arm - Extra-Hard
#302162
Extra-hard molded composite front lower suspension arm. Recommended for use in high-grip conditions or with foam tires. Marked with âśXHâť for easy identification. May be used on either left or right side.
|
|
|
Front Susp. Arm - Extra-Hard - 1-Hole
#302164
Molded composite front lower suspension. Extra-hard composite mixture arms (labeled âśXHâť) for high-traction foam-tire racing. The specially-formulated composite material allows for a very light yet very durable suspension arm that can withstand the rigors of high-performance racing with foam tires. Can be also used for rubber tires. Fits XRAY T2, T3 cars.
|
|
|
Composite Front Susp. Arm 2-Hole - Hard
#302165
Molded composite front lower suspension arms with 2-holes for optional setting. Inner position is used for increased steering, outer position is used for more stable handling. Standard hard-composite mixture arms (labeled âśHâť) for rubber-tire racing. Can be also used for foam tires. Fits XRAY T3.
|
|
|
Composite Front Susp. Arm 2-Hole - X-Hard
#302166
Molded composite front lower suspension arms with 2-holes for optional setting. Inner position is used for increased steering, outer position is used for more stable handling. Extra-hard composite mixture arms (labeled âśXHâť) for high-traction foam-tire racing. Can be also used for rubber tires. Fits XRAY T3.
|
|
|
Comp. Front Susp. Arm 1-Hole - Graphite
#302167
Molded lightweight composite front lower suspension arm. The specially-formulated graphite composite material allows for a very light suspension arm that can withstand the rigors of high-performance racing.
|
|
|
Composite Steering Block - Medium - V2
#302252
Molded composite steering block of âśmediumâť hardness (M) for rubber-tire racing. The steering block features two Ackermann positions, and uses small but robust 5x10 ball-bearings to minimize unsprung weight. Can be also used for foam tires. Fits XRAY T2, T3 cars.
|
|
|
Alu Steering Block
#302256
Alu Steering Block for XRAY T2 is CNC-machined from premium lightweight T6 aluminum, polished for luxuriuous and stylish appearance. Ultra-strong construction provides very long life and durability in even the most extreme racing conditions.
|
|
|
Ball-Bearing Composite Bushing (4)
#302295
Molded composite bushings for installing ball-bearings in alu steering blocks (302256) and alu rear uprights (303358 and 303359). Set of 4.
|
|
|
Alu C-Hub Block - Caster 0° - Orange
#302334
CNC-machined highest-quality duraluminum C-hub for XRAY T4. Caster pre-set at 0 degrees. Engraved with "0" for easy identification. Fits left or right sides. Includes two nylon bushings.
|
|
|
Alu C-Hub Front Block Right - Caster 4° - Orange
#302337
CNC-machined highest-quality duaraluminum C-hub for right steering block of T2, T3. Caster pre-set at 4°. Engraved with "R4" to easy identification. Includes two nylon bushings. Use with left-side alu 4° C-hub #302338.
|
|
|
Alu C-Hub Front Block Left - Caster 4° - Orange
#302338
CNC-machined highest-quality duaraluminum C-hub for left steering block of T2, T3. Caster pre-set at 4°. Engraved with "L4" to easy identification. Includes two nylon bushings. Use with right-side alu 4° C-hub #302337.
|
|
|
Alu C-Hub Front Block Right - Caster 6° - Orange
#302339
CNC-machined highest-quality duaraluminum C-hub for right steering block of T2, T3. Caster pre-set at 6°. Engraved with "R6" to easy identification. Includes two nylon bushings. Use with left-side alu 6° C-hub #302340.
|
|
|
Alu C-Hub Front Block Left - Caster 6° - Orange
#302340
CNC-machined highest-quality duaraluminum C-hub for left steering block of T2, T3. Caster pre-set at 6°. Engraved with "L6" to easy identification. Includes two nylon bushings. Use with right-side alu 6° C-hub #302339.
|
|
|
Composite C-Hub Front Block, Right - 4° Deg.
#302345
Molded composite C-hub for front right steering block on XRAY T2, T3. Caster pre-set at 4° for neutral handling. Engraved with "4R" for easy identification. Use with left-side composite 4° C-hub #302346.
|
|
|
Composite C-Hub Front Block, Left - 4° Deg.
#302346
Molded composite C-hub for front left steering block on XRAY T2, T3. Caster pre-set at 4° for neutral handling. Engraved with "4L" for easy identification. Use with left-side composite 4° C-hub #302345.
|
|
|
Composite C-Hub Right - 2° Deg. - Medium (ECS)
#302361
Molded composite C-hub for right steering block of T2, T3. Caster pre-set at 2°. Medium rigidity for rubber-tire racing. Use with matching left-side C-hub #302362. Can be also used for foam tires.
|
|
|
Composite C-Hub Left - 2° Deg. - Medium (ECS)
#302362
Molded composite C-hub for left steering block of T2, T3. Caster pre-set at 2°. Medium rigidity for rubber-tire racing. Use with matching right-side C-hub #302361. Can be also used for foam tires.
|
|
|
Composite C-Hub Right - 6° Deg. - Medium (ECS)
#302365
Molded composite C-hub for right steering block of T2, T3. Caster pre-set at 6°. Medium rigidity for rubber-tire racing. Use with matching left-side C-hub #302366. Can be also used for foam tires.
|
|
|
Composite C-Hub Left - 6° Deg. - Medium (ECS)
#302366
Molded composite C-hub for left steering block of T2, T3. Caster pre-set at 6°. Medium rigidity for rubber-tire racing. Use with matching right-side C-hub #302365. Can be also used for foam tires.
|
|
|
Composite C-Hub Right - 0° Deg. - Hard (ECS)
#302369
Molded composite C-hub for right steering block. Caster pre-set at 0°. HARD rigidity for rubber-tire racing and also foam tire racing. Use with matching left-side C-hub #302370.
|
|
|
Composite C-Hub Left - 0° Deg. - Hard (ECS)
#302370
Molded composite C-hub for left steering block. Caster pre-set at 0°. HARD rigidity for rubber-tire racing and also foam tire racing. Use with matching right-side C-hub #302369.
|
|
|
Composite C-Hub Right - 2° Deg. - Hard (ECS)
#302371
Molded composite C-hub for right steering block of T2, T3. Caster pre-set at 2°. Hard rigidity for foam-tire racing. Use with matching left-side C-hub #302372. Can be also used for rubber tires.
|
|
|
Composite C-Hub Left - 2° Deg. - Hard (ECS)
#302372
Molded composite C-hub for left steering block of T2, T3. Caster pre-set at 2°. Hard rigidity for foam-tire racing. Use with matching right-side C-hub #302371. Can be also used for rubber tires.
|
|
|
Composite C-Hub Right - 4° Deg. - Hard (ECS)
#302373
Molded composite C-hub for right steering block of T2, T3. Caster pre-set at 4°. Hard rigidity for foam-tire racing. Use with matching left-side C-hub #302374. Can be also used for rubber tires.
|
|
|
Composite C-Hub Left - 4° Deg. - Hard (ECS)
#302374
Molded composite C-hub for left steering block of T2, T3. Caster pre-set at 4°. Hard rigidity for foam-tire racing. Use with matching right-side C-hub #302373. Can be also used for rubber tires.
|
|
|
Composite C-Hub Right - 6° Deg. - Hard
#302375
Molded composite C-hub for right steering block of T2, T3. Caster pre-set at 6°. Hard rigidity for foam-tire racing. Use with matching left-side C-hub #302376. Can be also used for rubber tires.
|
|
|
Composite C-Hub Left - 6° Deg. - Hard
#302376
Molded composite C-hub for left steering block of T2, T3. Caster pre-set at 6°. Hard rigidity for foam-tire racing. Use with matching right-side C-hub #302375. Can be also used for rubber tires.
|
|
|
Graphite Steering Plate Set
#302570
Smart chassis flex adjustment via graphite steering plate which can be mounted with an additional aluminum stand.
|
|
|
Alu Adjustable Turnbuckle 39mm M3 L/R - Orange (2)
#302612-O
For serious racers who are conscious of weight savings, XRAY offers adjustable left & right M3 steering turnbuckles manufactured from strong, lightweight 7075 T6 aluminum. Lighter by 50%. Precision threading for fine toe adjustment. Length of 39mm. Orange color. Set of 2.
|
|
|
Belt Tensioner Set T2'007, T2'008, T2'009, T3
#303071
Smart, easy-to-use XRAY Belt Tensioner Set for controlling center drive belt tension and twisting. High-quality components include CNC-machined lightweight alu mounting post, high-speed ball-bearings, and mounting hardware. Fits T2'007, T2'008, T2'009, T3 cars.
|
|
|
Set of Alu Shims (1.0mm, 2.0mm, 3.0mm) – Silver
#303120
Ultimate assortment of set-up shims. You can use the shims for easy and accurate adjustment of:
- front and rear roll center
- front bump steer
- front and rear toe-in
- wheelbase
|
|
|
Set of Alu Shims (1.0mm, 2.0mm, 3.0mm) – Blue
#303121
Ultimate assortment of set-up shims. You can use the shims for easy and accurate adjustment of:
⢠front and rear roll center
⢠front bump steer
⢠front and rear toe-in
⢠wheelbase
|
|
|
Alu Shim 3x5x2.0mm - Orange (10)
#303140-O
Alu shims 3x5mm, 2.0mm thick which can be used for various purposes including roll center adjustment. Orange color. Set of 10.
Color may slightly vary between products.
|
|
|
Alu Shim 3x5x1.0 (10)
#303141
Alu shims, 1.0mm thick, for rear roll center adjustment on XRAY T2. Set of 10.
|
|
|
Alu Shim 3x5x0.5mm - Orange (10)
#303142-O
Alu shims 3x5mm, 0.5mm thick which can be used for various purposes including roll center adjustment. Orange color. Set of 10.
|
|
|
Alu Shim 3x5x0.25mm (10)
#303143
Alu shims 3x5mm, 0.25mm thick which can be used for various purposes including roll center adjustment. Set of 10.
|
|
|
Rear Suspension Arm - Hard
#303161
Hard molded composite rear lower suspension arm. Recommended for use in standard conditions or with rubber tires. Marked with âśHâť for easy identification. May be used on either left or right side.
|
|
|
Rear Suspension Arm - Extra-Hard
#303162
Extra-hard molded composite rear lower suspension arm. Recommended for use in high-grip conditions or with foam tires. Marked with âśXHâť for easy identification. May be used on either left or right side.
|
|
|
Composite Rear Susp. Arm 1-Hole - Extra-Hard - V2
#303164
Molded composite rear lower suspension arm of extra-hard composite mixture (labeled âśXHâť) for foam-tire racing. The specially-formulated composite material allows for a very light yet very durable suspension arm that can withstand the rigors of high-performance racing with foam tires. Can be also used for rubber tires. Fits XRAY T2, T3 cars.
|
|
|
Composite Rear Susp. Arm 2-Hole - Hard
#303165
Molded composite rear lower suspension arms with 2-holes for optional setting. Inner position is used for increased steering, outer position is used for more stable handling. Standard hard-composite mixture arms (labeled âśHâť) for rubber-tire racing. The specially-formulated composite material allows for a very light yet very durable suspension arm that can withstand the rigors of high-performance racing with rubber tires. Can be also used for foam tires. Fits XRAY T2, T3 cars.
|
|
|
Composite Rear Susp. Arm 2-Hole - X-Hard
#303166
Molded composite rear lower suspension arms with 2-holes for optional setting. Inner position is used for increased steering, outer position is used for more stable handling. Extra-hard composite mixture arms (labeled âśXHâť) for foam-tire racing. The specially-formulated composite material allows for a very light yet very durable suspension arm that can withstand the rigors of high-performance racing with foam tires. Can be also used for rubber tires. Fits XRAY T2, T3 cars.
|
|
|
Comp. Rear Susp. Arm 1-Hole - Graphite
#303167
Molded lightweight composite rear lower suspension arm. The specially-formulated graphite composite material allows for a very light yet suspension arm that can withstand the rigors of high-performance racing.
|
|
|
Alu Adjustable Turnbuckle 26mm M3 L/R - Orange (2)
#303212-O
For serious racers who are conscious of weight savings, XRAY offers adjustable left & right M3 steering turnbuckles manufactured from strong, lightweight 7075 T6 aluminum. Lighter by 50%. Precision threading for fine toe adjustment. Length of 26mm. Orange color. Set of 2.
|
|
|
Composite Upright 1° Outboard Toe-In - Right - Medium
#303351
Molded-composite right rear upright features built-in 1° of outboard toe-in to improve the rotation of the car in corners and prevent suspension geometry changes in serious crashes. Medium rigidity (labeled âśMâť) specially optimized for rubber-tire racing. Use with matching left-side rear upright 303361. Can be also used for foam tires.
|
|
|
Composite Upright 0° Outboard Toe-In - Medium
#303352
Molded-composite rear upright features built-in 0° of outboard toe to improve traction and prevent suspension geometry changes in serious crashes. Medium rigidity (labeled âśMâť) specially optimized for rubber-tire racing. Use on both left and right sides of the car. Can be also used for foam tires.
|
|
|
Composite Upright 1° Outboard Toe-In - Right - Hard
#303353
Molded-composite right rear upright features built-in 1° of outboard toe-in to improve the rotation of the car in corners and prevent suspension geometry changes in serious crashes. Hard rigidity (labeled âśHâť) specially optimized for foam-tire racing. Use with matching left-side rear upright 303363. Can be also used for rubber tires.
|
|
|
Alu Upright Rear 1° Outboard Toe-In (L+R)
#303358
CNC-machined rear upright made from premium lightweight T6 aluminum. Ultra-strong rear upright provides very long life and durability in even the most extreme racing conditions, features an integrated 1° outboard toe-in. Use of outboard toe-in will increase the corner speed. Complete set of left and right blocks.
|
|
|
Alu Upright Rear 2° Outboard Toe-In (L+R)
#303359
CNC-machined rear upright made from premium lightweight T6 aluminum. Ultra-strong rear upright provides very long life and durability in even the most extreme racing conditions, features an integrated 2° outboard toe-in. Use of outboard toe-in will increase the corner speed. Complete set of left and right blocks.
|
|
|
Composite Upright 1° Outboard Toe-In - Left - Medium
#303361
Molded-composite left rear upright features built-in 1° of outboard toe-in to improve the rotation of the car in corners and prevent suspension geometry changes in serious crashes. Medium rigidity (labeled âśMâť) specially optimized for rubber-tire racing. Use with matching right-side rear upright 303351. Can be also used for foam tires.
|
|
|
Composite Upright 0° Outboard Toe - Medium - 1-Hole
#303362
Molded-composite rear upright features built-in 0° of outboard toe to improve traction and prevent suspension geometry changes in serious crashes. This 1-hole upright may be used on high-traction tracks or tracks with long sweepers, since the position of the center hole will allow faster driving through those corners because of better cornering speed.
|
|
|
Composite Upright 1° Outboard Toe-In - Left - Hard
#303363
Molded-composite left rear upright features built-in 1° of outboard toe-in to improve the rotation of the car in corners and prevent suspension geometry changes in serious crashes. Hard rigidity (labeled âśHâť) specially optimized for foam-tire racing. Use with matching right-side rear upright 303353. Can be also used for rubber tires.
|
|
|
Composite Upright 0° Outboard Toe - Hard - 1-Hole
#303364
Molded-composite rear upright features built-in 0° of outboard toe to improve traction and prevent suspension geometry changes in serious crashes. This 1-hole upright may be used on high-traction tracks or tracks with long sweepers, since the position of the center hole will allow faster driving through those corners because of better cornering speed.
|
|
|
Alu 4.9mm Ball End (2)
#303431
Alu 4.9mm ball ends, same as included in anti-roll bar sets #302401 (front) and #303401 (rear). Set of 2.
|
|
|
Alu 4.9mm Ball End - Orange (2)
#303431-O
Alu 4.9mm ball ends, same as included in anti-roll bar sets #302401 (front) and #303401 (rear). Set of 2. Orange colour.
|
|
|
Alu Anti-Roll Bar Collar (2)
#303440
Alu anti-roll bar collars remove play from the front anti-roll bar wire, increasing cornering speed and stability. Intended for serious racers who desire maximum performance from their car. Fits all T2 cars. Set of 2 collars and setscrews.
|
|
|
Diff Pulley 34T with Labyrinth Dust Covers
#305054
Molded-composite 34T diff pulley with XRAYâ™s innovative yet very smart Labyrinth Dust Cover™ diff protection system which has been carried over from the previous T1/T2 platforms where it has been very successfully used for many years. For T2â™008, T2'009, T3 US Foam-spec Edition ball differential.
|
|
|
Diff Pulley 38T with Labyrinth Dust Covers
#305058
Molded-composite 38T diff pulley with XRAYâ™s innovative yet very smart Labyrinth Dust Cover™ diff protection system which has been carried over from the previous T1/T2 platforms where it has been very successfully used for many years. Set includes also front axle 38T side covers.
For T2â™008. T2'009, T3 EU Rubber-spec Edition ball differential.
|
|
|
XRAY Multi-Differential T3 LiPo
#305105
The unique Multi-Diff™ caused a sensation in RC car racing when it was first introduced, and the updated version is no different. The Multi-Diff™ T3 LiPo has 3 different settings.
|
|
|
Multi-Differential Main Axle T3 LiPo
#305117
CNC-machined lightweight aluminum main axle includes factory-pressed (non-replaceable) high-quality German one-way bearings, hand-ground for maximum running precision and strength.
|
|
|
Multi-Diff Locking Axle - Spring Steel
#305121
Multi-Diff™ locking axle is CNC-machined from Hudy Spring Steel™. Fits both #305102 and #305103 Multi-Diffs™ for all XRAY T1 cars. Must only be used with #305131 Inner Driveshaft Adapters.
|
|
|
Inner Driveshaft Adapter 3.5mm - Spring Steel (2)
#305132
Precision-machined, specially-lightened outdrives for use with XRAY T2'008 Multi-Diff™ axle. Will fit only 3.5mm drive shaft replacement plastic caps (#305241). The new lightweight one-way outdrives have a hex hole machined at each end. Madefrom world-renowned HUDY Spring Steel™ for high strength and durability. Set of 2.
|
|
|
Timing Belt Pulley 38T for Multi-Diff
#305158
Molded-composite 38T pulley and side covers for #305104 XRAY Multi-Diff™ for T2â™008, T2'009, T3 EU Rubber-spec Edition. The teeth number (38) is embossed into the side of the pulley for easy identification.
|
|
|
Composite Solid Axle 34T - Set
#305184
Unique lightweight composite front solid axle 34T for XRAY T2â™008, T2'009, T3 US Foam-spec Edition. The new composite solid axle has a very stiff structure and ultra-light weight that was achieved by injecting the entire solid axle from XRAYâ™s own self-designed & mixed lightweight composite material.
|
|
|
ECS Drive Shaft 50mm - HUDY Spring Steel™
#305225
CNC-machined 50mm ECS drive shaft made from world-renowned top-secret HUDY Spring Steel™. This race-quality drive shaft is a spare part for #305325 Equalized Corner Speed (ECS) Drive Shaft 50mm - Hudy Spring Steel™ (1), exclusively manufactured by HUDY.
|
|
|
ECS Drive Shaft 52mm - HUDY Spring Steel™
#305227
CNC-machined 52mm ECS drive shaft made from world-renowned top-secret HUDY Spring Steel™. This race-quality drive shaft is a spare part for #305327 Equalized Corner Speed (ECS) Drive Shaft 52mm - Hudy Spring Steel™ (1), exclusively manufactured by HUDY.
|
|
|
Drive Shaft 50mm - Hudy Spring Steel™
#305323
CNC-machined 50mm drive shaft for XRAY T2,T3 made from world-renowned top-secret HUDY Spring Steel™. This race-quality drive shaft is the smallest in the world, exclusively manufactured by HUDY.
|
|
|
Alu Wheel Hub (2)
#305350
CNC-machined clamping-style alu wheel hubs for XRAY T2, T3. Set of two.
|
|
|
Alu Wheel Hub - Offset +1.5mm (2)
#305353
CNC-machined clamping-style alu wheel hub for T2, T3 features 1.5mm offset to give wider track-width. Set of 2 includes clamping screws.
|
|
|
ECS Drive Shaft Pin 1.5 x 8.5 - V3 (2)
#305390
Polished chrome pin for ECS drive shaft, 1.5 x 8.5mm. Specially hand-ground for maximum precision. To help prevent of loosening of the setscrew from the ECS shaft, XRAY recommends using these new pins with flat spots. The flat spots allow the setscrew to better settle into the coupling. Set of 2.
|
|
|
ECS Drive Shaft Pin 1.5 x 9 (2)
#305391
Polished chrome pin for ECS drive shaft, 1.5 x 9mm. Specially hand-ground for maximum precision. To help prevent of loosening of the setscrew from the ECS shaft, XRAY recommends using these new pins with flat spots. The flat spots allow the setscrew to better settle into the coupling. Set of 2.
|
|
|
High-Performance Drive Belt Front 3x507mm
#305431
Ultra-Flex High-Performance Drive Belt
For top competition racing XRAY offers these specially modified high-performance drive belts. The belts are very thin and elastic as possible to create much more effective transmissions, save batteries and eliminate friction. The belt is specially modified - hand ground on a special machine so the belt is as thin as possible, but in such a way that it will still have long life.
"A must have item for serious racers."
|
|
|
Alu Solid Layshaft
#305521
Alu middle layshaft for T2â™008, T3 has been strategically CNC-machined to minimize rotating weight without compromising strength or integrity. The hollow layshaft is perfectly round with zero runout, eliminating drivetrain vibration and producing a positive balance. The perfectly flat spur gear mounting surface reduces gear wobble.
|
|
|
Alu Solid Layshaft - Orange
#305521-O
Alu middle layshaft for T2â™009, T3 has been strategically CNC-machined to minimize rotating weight without compromising strength or integrity. The hollow layshaft is perfectly round with zero runout, eliminating drivetrain vibration and producing a positive balance. The perfectly flat spur gear mounting surface reduces gear wobble. Orange colour.
|
|
|
Composite Offset Spur Gear 99T / 64
#305869
Addition to the range of precision-molded 64-pitch offset spur gears made from special hard composite material, strategically lightened to reduce rotating mass without compromising strength or durability.
|
|
|
T4 Graphite Battery Strap for LiPo - Set
#306165
Pre-assembled Graphite Battery Strap for LiPo features the XRAY smart battery holder system and battery tweak-free mounting system. The alu capture wheel enables you to easily close and secure the battery strap without any clips. Black color.
|
|
|
Alu LiPo Battery Backstop (F+R)
#306186
Set of alu LiPo battery backstops (F+R) to prevent LiPo battery movement on chassis. Ultra-strong construction provides long life and durability in even the most extreme racing conditions. CNC-machined from premium Swiss 7075 T6 aluminum to add weight to the car and improve balance.
|
|
|
T4 Graphite + Alu Fully Adjustable Battery Holder
#306191
Innovative adjustable battery holder which allows to move the batteries front and rear but also left to right for easy and comfortable weight transfer adjustment. It allows to move the battery which changes the Front/Rear weight balance by 4mm.
|
|
|
T4'19 Graphite + Alu Fully Adjustable Battery Holder
#306196
Fully adjustable aluminum battery holder allows to move the batteries in all directions - front/rear and also left/right. The adjustable battery holder allows for easy and comfortable weight transfer adjustment.
|
|
|
T4 Graphite + Brass Fully Adjustable Battery Holder
#306198
Fully adjustable brass battery holder allows to move the batteries in all directions - front/rear and also left/right. The adjustable battery holder allows for easy and comfortable weight transfer adjustment.
|
|
|
T4 Alu Top Deck Mount - Orange
#306516-O
Optional alu top deck mount improves forward and rear traction, making the car more stable and easier to drive under low-traction conditions.
|
|
|
Alu Shock Spring Retaining Collar (4)
#308031
Aluminum CNC-machined shock collars that can be used on the XRAY shock absorbers to increase the durability. Stylish and lightweight collars are CNC-machined from premium Swiss 7075 T6 aluminum and are strategically lightened.
|
|
|
Alu XRAY Shock Spring Retaining Collar - Orange (4)
#308031-O
Aluminum CNC-machined shock collars that can be used on the XRAY shock absorbers to increase the durability. Stylish and lightweight collars are CNC-machined from premium Swiss 7075 T6 aluminum and are strategically lightened. Set of four. Orange color.
|
|
|
XRAY 4S Spring-Set C=2.3 (2)
#308274
The all-new linear 4S springs marked 2.3. 4S springs have been specifically designed to complement the SLP shocks and are 20mm long. Set of 2.
|
|
|
XRAY 4S Spring-Set C=2.5 (2)
#308275
The all-new linear 4S springs marked 2.5. 4S springs have been specifically designed to complement the SLP shocks and are 20mm long. Set of 2.
|
|
|
XRAY 4S Spring-Set C=2.9 (2)
#308277
The all-new linear 4S springs marked 2.9. 4S springs have been specifically designed to complement the SLP shocks and are 20mm long. Set of 2.
|
|
|
XRAY 4S Spring Set C=2.6 (2)
#308286
The all-new linear 4S springs marked 2.6. 4S springs have been specifically designed to complement the SLP shocks and are 20mm long. Set of 2.
|
|
|
XRAY 4S Spring Set C=3.0 (2)
#308290
Linear 4S springs marked 3.0. 4S springs have been specifically designed to complement the SLP shocks and are 20mm long. Set of 2.
|
|
|
ULP Alu Shock Body (2)
#308324
ULP alu shock bodies are CNC-machined from premium Swiss 7075 T6 aluminum and hardened to ensure maximum lifespan. Suitable for ULP Shock Absorbers.
|
|
|
ULP Composite Shock Parts
#308334
One frame containing composite parts (except pistons) for two T4 ULP aluminum shock absorbers.
|
|
|
Set of Ceramic Ball-Bearings (14)
#309002
Set of 14 high-performance ceramic ball-bearings for XRAY touring cars. Set of 5x10x4 bearings (10pcs) and 10x15x4 bearings (4pcs).
|
|
|
Silicone Grease 00
#309500
Super differential silicone lube in a resealable syringe. This is the best Ball Differential lubricant combined with the easiest applicator on the market.
|
|
|
Silicone Oil 20W
#309520
Specially developed silicone shock oil, temperature resistant, low foaming formula. Advised to use in XRAY and any other shock absorbers.
|
|
|
Silicone Oil 25W
#309525
Specially developed silicone shock oil, temperature resistant, low foaming formula. Advised to use in XRAY and any other shock absorbers.
|
|
|
Silicone Oil 35W
#309535
Specially developed silicone shock oil, temperature resistant, low foaming formula. Advised to use in XRAY and any other shock absorbers.
|
|
|
Silicone Oil 40W
#309540
Specially developed silicone shock oil, temperature resistant, low foaming formula. Advised to use in XRAY and any other shock absorbers.
|
|
|
Silicone Oil 50W
#309550
Specially developed silicone shock oil, temperature resistant, low foaming formula. Advised to use in XRAY and any other shock absorbers.
|
|
|
One-Way Lube 25ML
#309580
Special lubricant for one-way bearings used in one-way differentials or on the main layshaft. Lubricant improves engaging speed and increases one-way bearing durability. A must for the serious racer. A drop will cure a slipping one-way immediately.
|
|
|
Tires XXT-M for Asphalt (2)
#309617
Rubber tires specially developed for medium & high-grip asphalt. Fits most popular sizes of wheels and inserts. Set of 2.
|
|
|
Body Stratus 2.0 + Accessories (Protoform)
#309720
Stratus (ver 2.0) body made from high-strength Lexan® fits 1:10th scale electric touring cars such as the XRAY T4. Includes window mask, add-on wing, and mounting hardware.
|
|
|
Balancing Chassis Weights (Front - 2pcs.)
#309820
Precision chassis weights
A complete set of 2 chassis balancing weights and mounting hardware. Designed for XRAY T1 to be mount at the pre-drilled holes at the front of the chassis but fits any other race car as well. Made from brass.
|
|
|
Balancing Chassis Weights (Rear - 6 pcs.)
#309830
Precision chassis weights
A complete set of 6 chassis balancing weights and mounting hardware. Designed for XRAY T1 to be mount at the pre-drilled holes at the rear of the chassis but fits any other race car as well. Made from brass.
|
|
|
Precision Balancing Chassis Weights (4 pcs.)
#309840
A complete set of 4 chassis balancing weights (2x 5g + 2x 10g) and mounting hardware. Designed for XRAY electric & nitro touring car to be mounted at pre-drilled chassis holes; also fits other race cars as well. Made from steel and laser engraved with the weight value for easy identification.
|
|
|
Balancing Chassis Weights (Center - 3 pcs)
#309850
Precision chassis weights
A complete set of 3 chassis balancing weights and mounting hardware. Designed for XRAY T1 to be mount at the pre-drilled holes at the center of the chassis but fits any other race car as well. Made from brass.
|
|
|
Precision Balancing Chassis Weights Center 20g
#309853
Precision-machined brass chassis balancing weights. Designed for XRAY T3 LiPo chassis for mounting at pre-drilled chassis holes in the center of the car. Laser engraved with the weight value for easy identification. 20g weights.
|
|
|
Precision Balancing Chassis Weights Center 30g
#309854
Precision-machined brass chassis balancing weights. Designed for XRAY T3 LiPo chassis for mounting at pre-drilled chassis holes in the center of the car. Laser engraved with the weight value for easy identification. 30g weights.
|
|
|
Brass Battery Backstop
#309855
The stylish optional CNC-machined battery backstop made from brass material is used as a backstop and works also as an additional weight.
|
|
|
XRAY Premium Silicone Oil 100 cSt
#359210
XRAY Premium Silicone Oil 100 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel.
|
|
|
XRAY Premium Silicone Oil 150 cSt
#359215
XRAY Premium Silicone Oil 150 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel.
|
|
|
XRAY Premium Silicone Oil 200 cSt
#359220
XRAY Premium Silicone Oil 200 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel.
|
|
|
XRAY Premium Silicone Oil 250 cSt
#359225
XRAY Premium Silicone Oil 250 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel.
|
|
|
XRAY Premium Silicone Oil 300 cSt
#359230
XRAY Premium Silicone Oil 300 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel.
|
|
|
XRAY Premium Silicone Oil 400 cSt
#359240
XRAY Premium Silicone Oil 400 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel.
|
|
|
XRAY Premium Silicone Oil 450 cSt
#359245
XRAY Premium Silicone Oil 450 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel.
|
|
|
XRAY Premium Silicone Oil 500 cSt
#359250
XRAY Premium Silicone Oil 500 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel.
|
|
|
XRAY Premium Silicone Oil 550 cSt
#359255
XRAY Premium Silicone Oil 550 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel.
|
|
|
XRAY Premium Silicone Oil 600 cSt
#359260
XRAY Premium Silicone Oil 600 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel.
|
|
|
XRAY Premium Silicone Oil 800 cSt
#359280
XRAY Premium Silicone Oil 800 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel.
|
|
|
XRAY Premium Silicone Oil 900 cSt
#359290
XRAY Premium Silicone Oil 900 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel.
|
|
|
XRAY Premium Silicone Oil 1000 cSt
#359301
XRAY Premium Silicone Oil 1000 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel.
|
|
|
XRAY Premium Silicone Oil 2000 cSt
#359302
XRAY Premium Silicone Oil 2000 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel.
|
|
|
XRAY Premium Silicone Oil 300 000 cSt
#359398
XRAY Premium Silicone Oil 300 000 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel.
|
|
|
Carbide Ball 2.4mm (12)
#930120
Carbide balls 2.4mm for ball differential. Improved, smoother diff operation over standard steel diff balls.
|
|
|
Ceramic Ball 2.4mm (12)
#930220
Set of 12 premium-quality ceramic balls made from extra-hard Si3N4 silicone nitride ceramic. Significantly improves differential lifespan while reducing friction and vibration. Higher RPM capabilities.
|
|
|
Ceramic Ball-Bearing Axial F3-8 3x8x3.5
#930238
High-precision axial thrustbearing 3x8x3.5mm for ball differential features ceramic balls. Highest-quality material and design guarantees the smoothest diff operation and increased life. Ceramic balls in the axial cage are made from extra-hard Si3N4 silicone nitride ceramic. Significantly improves differential lifespan while reducing friction and vibration. Higher RPM capabilities.
|
|
ID |
Product Name |
Released |
302537 |
|
Sep. 30, 2019 |
302544 |
|
Sep. 30, 2019 |
305784-O |
|
May 27, 2019 |
305866-O |
|
May 27, 2019 |
305870-O |
|
May 27, 2019 |
305880-O |
|
May 27, 2019 |
306195 |
|
May 22, 2019 |
309861 |
|
May 08, 2019 |
306196 |
|
Apr. 11, 2019 |
306198 |
|
Apr. 11, 2019 |
308290 |
|
Feb. 20, 2019 |
305342 |
|
Feb. 12, 2019 |
301210 |
|
Jan. 29, 2019 |
301232 |
|
Dec. 13, 2018 |
301231 |
|
Sep. 21, 2018 |
302544-O |
|
Sep. 21, 2018 |
308044-O |
|
Sep. 21, 2018 |
303125-O |
|
Sep. 10, 2018 |
941014 |
|
Mar. 21, 2018 |
305577-O |
|
Jan. 19, 2018 |
| |
|
|